Machine Learning

4 CNC Machining Myths and Misunderstandings

How long have you been a CNC machinist? Years? Decades? Are you considering or just getting started?

Every profession has its facts – and some questionable knowledge. Today, we’re going to take a look at some of the myths and misunderstandings out there.
Here’s some you may have heard:

1.    If You’ve Had Success Running a Job Before, You Won’t Have Any Problems In the Future

To get the same results, you have to set your CNC job up in exactly the same way – without any variation at all. If you’ve had a miscue of some kind, you’re likely misremembering how the job was done in the past.

2.    CNC Machining is Easy for Anyone to Do

There’s a little bit of truth to this, but it’s still an exaggeration. CNC machining is easier to start from scratch. It allows people with less experience and skills to produce more consistent results. You can automate much of the process, which takes away some chance for human error.

However, programming, setting up workspaces, monitoring production, and making adjustments to the cutting process takes experience. It definitely pays off with faster production times and higher product quality.

3.    Jobs Always Take the Same Amount of Time to Run

They do…if everything goes exactly as expected. However, while CNC machines automate work and make production easier, they don’t guarantee the same run time for each job.

For example, your cutting tools will wear down. You may have different operators who take varying amounts of time to keep the machine running at a good speed. With repeating jobs, you should be able to have a reasonably close time of completion. For new jobs, however, time to complete may vary.

4.    CNC Machines Don’t Use G-Code Anymore

Just about every CNC machine uses a CAM system – that’s right. However, G-code is the output of every CAM system, which your CNC machine uses to run. Even today, it’s faster for CNC machine operators to modify the G-code than it is to make changes in the CAM system.

Code still matters, a lot and so does the experience and skill of the CNC machine operator.

Yes, running a CNC machine is easier than conventional machinery, but it’s not technically “easy.” Just like any other profession, the more skill and experience you have, the better results you’ll get. 

Leave a Reply

Your email address will not be published. Required fields are marked *

forty two  ⁄    =  7